MAC雙電單壓電磁閥,介紹MAC電磁閥
• EXTERNAL PILOT: An external pilot supply is required when main valve pressures are
lower than 30 psi on solenoid pilot or 25 psi on remote air pilot operated models. To
convert from internal to external pilot on solenoid models simply rotate pilot housing
180 degrees and connect external pilot source. (Use either M5 or#10-32 fitting.) On
remote air pilot models, specify -RE.
功耗 1.0W-24W；Inrush:33VA   Holding:25VA
反應時間 24VDC(8.5W):   通電: 38ms     斷電:25ms
120/60         通電:135-45ms  斷電: 25-34ms
線圈及泄漏量 防塵防線圈,如需防護等為IP65請與確認； 泄漏量150cm³/min
這些空氣版本的特點：
•用于空氣/彈簧返回的大型檢查蓄電池。
•平衡閥芯不受排氣背壓或入口限制的影響。
可以插入雙向操作。

MAC雙電單壓電磁閥,介紹MAC電磁閥

技術參數：
介質 壓縮空氣，真空或惰性氣體
壓力范圍 外導：真空到150PSI； 內導：25到150PSI
流量 2”(55Cv),2.5”(60Cv)
電壓范圍 正常電壓的-15%到+10%
VACUUM APPLICATIONS: Connect the vacuum source to port #3 with port #1 open to
atmosphere, and use external pilot on solenoid pilot operated models. On remote air
pilot models, use -RE.
• SELECTOR APPLICATIONS: Pipe higher pressure to port #1 and lower pressure to port #3.
• INTERNAL PILOT: Use for main valve pressure of 30 to 150 PSI on all models. Includes
ball check in the body and an M5x0.8 plug installed in the external pilot port.

,介紹MAC電磁閥